Відео

NICE explanation,can u give code,Suppose i want normal mode then what i want changes

Looks good to me.. I would say you are a Successful Engineer.. Hell I should went to Engineering school. My brother the Engineer,, I went into medicine.... lol. !!! good video..

Hi great show the only problem is in my country we can't get the acid not that I like the idea is there some other way around it

Thanks for sharing your knowledge, you mentioned 75 grams of CuSO4 per liter, do you mean 75 of copper as CuSO4 which mean you will dissolve about 300 grams of CuSO4 or you mean 75 CuSO4? Cause I read in different sources that copper content should be 50 grams per liter that mean we need 200 grams of CuSO4 per liter. Another question, 10% of sulphuric acid mean add 100 ml sulphuric acid to 1 liter of water, or water plus Sulphuric acid should be 1 liter? Thanks for your help

Put a neodymium magnet under the plastic box and separate powder from iron . Simple.

Thanks for that, cheers

👍Thank you.

This is especially pertinent for old brittle tyres that are hard to get off the rim.

how much time do you run the cell to finish the process?

I melted my first 5.5 gram bead this weekend because of this video. Thank you.

Thank you so much

Good yield!

Great video mate I'm just starting so awesome info thank you for sharing iv hit you up have an awesome day

For those who cannot melt copper pins into bars for the anode, instead could the pins be put into a porous bag with a connection to the power supply and dunked into the electrolyte? Similar to using silver shot or cornflakes in a silver cell.

The purple stuff is gold contaminated with aluminium. Nile red was actually TRYING to make that stuff! If you were using computer parts, heat sincs etc, some al would have gotten mixed in

Great video,thanx.However big disappointment for using the FINAL chemistry separation for Ag !!! Tell me please what I am missing here: Why should we use electrolises for Cu separation instead of the way , how people did it back in the days ??? Using flame torch... without the need of electrolyses ? ...the classical metod when ading Pb and heating it together on a cement ... Why is this better ? Thank you . Because Cooper separation from the aloy has never been really a big problem as far as I know even wehen using the old clasical method , hasn't it ? . Separating silver and other precious metal contaminants from the Gold ....that is the true difficult story.... That is the chemistry part,ok... Tell me please what I am missing here.... Thanx Btw. The chemistry PART 2 is absolutely fine, getting 99.9 ? thumbs up. I just dont get the electrolises Cu part... Why to overcomplicate? For Ag/Au separation we must have a bit different electrolictic solution in the Beaker , dont we ??? 😊 You may consider making video on this. Anyway thank you.

If i dont use enough sulfamic acid to avoid overdousing can i still overwhelmed with smb to precipitate? Assuming it doesnt denox properly?

I can hear my teacher scream when seeing you write in that notebook.

انك تستخدم تحليل للنحاس بي ملح البحر هل هدا صحيح❤

Crazy I mightnneed to try rhis

Very interesting video❤ But is there any alternative to gold as once I saw a black color strip instead of yellow colour one?

The pcv sistem works under negative pressure to help exit positve carncase pressure if you install that filter, the sistem would not work well

Thanks for the great video, i got a hold of about 50kg of un assembled enig pcb panels for free, how do i calculate the profitable potential from this? Maybe the pcb also need to be processed to small pieces so i will use smaller amount of nitric acid ? What you recommend?

I liked the ball mill and chain mill videos and builds. Would you consider a video on making a dyi shredder. Like a paper shredder on steroids?

<Shaking head> glad ive found you're installation and Tv working. Having probs. New 12 volt Tv and nick knacks, put it all together. Downloaded a satellite tracker. Got optus 1 . Just got to set up the New TV. Not simple. Have to copy your settings,oh example. Thank you.

hey mate, thanks for the video, hope you see this comment and help me. I own an Hyundai load 2011 turbo diesel and has lack of power, works good when starting engine but then after few stops loose power so I have to turn the engine off then on and works good for a while and the like. few things has done so far: intake manifold cleaning vacuum valve replacement fuel filter replacement = here is my question, when I replace the fuel filter, in the step of priming , the fuel never came out , so I have to turn the engine on to see if the fuel could go up and it did , the engine automatically turned off, so I could prime it and took the air out of the line . my question is what happen when priming and the diesel doesn't come out? thanks mate

Would it work with just one hanger to suspend the anodes so more of the anode is in the solution.

I've watched plenty of vids - you for sure make the easiest to follow/absorb info vid i've seen in this neck of the yt woods 👊

Very Good Tutorial and very straight forward! Now it’s time to tackle my own 99 Grand Vitara VIT 5 transmission as it has noisy bearings. Well done! And thank you for posting this.

Using natural cotton wool in a funnel with gravity filtration although slow will capture everthing Much better.

How are you sir, these days you are making very few videos, I am very worried about one thing that in Stannous chloride test, which metal is the mark of dark Brown color, I don't understand

سلام استاد استاد ایا تیزاب را نمی توان برای الکترولیت انتخاب کرد ودر اون صورت واکنش مضاعفی در حل شدن طلا در ظرف ایجاد نخواهد شد لطفا راهنمایی کنید

Should have melt it and cast something gold before you ended the video. For all we know the was rust or something you had. Just saying...

Great idea SE. If you want to further tweak your control standard, index the RJ45 contact pin .it has a 50 micron industry standard. Following dissolution rate is brilliant! Impressive work. Thanks.

Could you not fill the new filter with diesel prior to installing it? Help keep the system primed?

That's a damn good yield compared to most other videos on the subject. 👍

With a dimer on the electrolytic bath, you would be able to vary the voltage as you wish and do a selective electrolytic deposition with all the metals in solution one by one. en.wikipedia.org/wiki/Electronegativities_of_the_elements_(data_page)

Thank you for doing that!! Great video too btw, I love your step by step instructions.

Thanks.👍

The purple is likely colloidal gold.

Hi what is average gold in 1 kg of DDR2/3 ram desktop rams and server ram. Ddr1ram. From 1kg how many gram chips we get . Please reply

I like that noisy cow. She does not explain things all that well, but she really enunciates and emotes!

Have you tried using solar panels to produce the DC for the hydrolysis? It works fine all day long on sunny days anyway.

Hows the ctach can going?

Amazing 🎉🎉❤😊 osmosis recovery Isotop fusion rare minerals

Please with translation 🙂

You've just saved me breaking something, thanks so much for this no nonsense explanation

Thanks buddy... Good job

Thanks for the video! I had this work done by a shop as I didn't have time to do it myself. I was put off by the work needed to drop the transmission, which is unfortunate because the internal components seem straightforward to work on. I wish I had been able to inspect everything myself, they were not able to get the needle bearings for inside the gears, which I would have liked to source myself. This helped me understand what is going on inside though, so thank you!!

Old Video of yours but I just came across it. If you watch some of the Latest Videos of Screetips on UA-cam He sometimes Get the Color purple when Refining Gold with Copper and Silver. So he sometimes says Gold is the Color Purple. So those purple colors on the Pan are Gold just in a Different forms. Hope this helps for the future Refining videos. Thanks for your feedback and Helpful tips and advise you’ve posted over the years.